|  Top |  |  Contact | Shipping | Warranty policy   | 
 
E-mail address:
Password:
new client? create an account
(forgotten)
 |  » Catalogue MobilCom.UA » Insulating materials » Scotch 3M » 932IZOLSR3M19
Óêðàèíñêèé English Ðóññêèé
Information
Contact Us
About
Shipping & Returns
Privacy Notice
Warranty policy
Currencies
Catalogue and Prices
Shopping Cart more
1 x Cable RK 75-7,2-a85P the screen (an aluminium foil + copper tinned the screen of 85 %), PE, analogue RG-11, for 1 meter
1 x Cable wire for household electrical appliances PVA 3õ6
1 x Cable RK 75-7,2-a85Víã the screen (an aluminium foil + tinned the screen of 85 %), PVC FR, analogue RG-11, for 1 meter
1 x Adapter N female - F male, NGD
1 x Ïåðåõ³äíèê âîëîêîííî-îïòè÷íèé ïèãòåéë SC MM G50/125
1 x Adapter Pigtail BNC male - BNC male , cable RG-174 N m
1 x Pincers for crimp insulated contact and clamps for wires AWG 10 – 22
1 x Cable MICROWAVE adapter Jumper N male-N male 9m
1 x Thermocontracting òðóáêà 3Ì with glue precoat, HDT-A 85/26, length 1ì
1 x Antenna Omnidirectional UTEL MC5-2100MHz-5dBi, Ukraine, magnet
1 x Adapter Pigtail Wi-Fi for Senao, Cisco, Linksys, 0,3m (N-male-RP-TNC)
1 x Adapter male BNC - female TNC, NGD
1 x Êîííåêòîðû Îïòè÷åñêèå ST-òèïà, SM 126mk, ïîä õâîñòîâèê 900m
1 x Fiber Optic Patch Cord LC-LC SM G9 Nm Simplex
1 x Adapter Pigtail Wi-Fi 5m RP-TNC (male) - RP-SMA (male)
1 x MikroTik RouterBOARD 493/ÀÍ Atheros AR7161, 680MHz
1 x Wireless network card D-Link DWL-G630 802.11g Wireless 54Mbps Adapter, PCMCIA
1 x Fiber Optic Cable OArP-12Å4(3õ4)-7, Single Mode, building, channels, pipes(pneumatic cabining), 12 fibres, coils of mandrel, aramid filament, without
1 x Cable MICROWAVE adapter Jumper 7/16 male-7/16 male N ** m
1 x Adapter Pigtail Wi-Fi for Senao, Cisco, Linksys, 6m (N-male-RP-TNC)
2 x Adapter FME male - SMA female, NGD
1 x Connector N-type female for RG-8, RG-213 (crimp), NGD
1 x Connector UHF female Panel Receptacle nut, NGB
1 x Tape poliester 56 3M, yellow, Polyester Film With Thermosetting Rubber Adhesive, (15mmx66m), t=13°Ñ, U=5500V
1 x Adapter N female - F female, NGD
1 x Gun for çàòÿæêè íåéëîíîâûõ ñòÿæåê øèðèíîé 2.5-5.0 ìì with àâòîìàòè÷åñêîé îáðåçêîé (ïëàñòìàññîâûé)
1 x Adapter Pigtail CDMA, GSM FME male - BNC female, cable RG-174, 0,25 m
1 x Case MikroTik Universal RB800 Indoor case
1 x Connector TNC male for RG-5D, (solder), NGD
1 x Adapter female SMA - female UHF, NGD
1 x Connector SMB female for RG-174 (crimp), NGT
1 x Insulation tape 1300 Temflex 3M Vinyl Electrical Yellow econom. (18mm x 20m x 0.13 mm), yellow, t=0…+9°Ñ
1 x Adapter N male - N female right angle, NGD
1 x Antenna Omnidirectional AKM-2,4GHz-9dBi
1 x Adapter N male - 2 N female, NGD
1 x Cable RK 75-4-16 screen (copper conductor The screen of 88 %), PVC, for 1 meter
1 x ~
1 x Àäàïòåð "ãîëîãî" âîëîêíà Îïòè÷åñêèé MU/PC - SM&MM
1 x Fiber Optic Cable OArBgP-48Å6(6õ8)-3,5, Single Mode, soil, building, 48 fibres, coils of mandrel, aramid filament, armor(corrugated ribbon), 3,5êÍ
1 x Adapter Pigtail Wi-Fi for Senao, Cisco, Linksys, 2 m (N-male-RP-TNC)
1 x Adapter Pigtail Wi-Fi for Planet, D-link, OvisLink, TP-link, 30m (N-male-RP-SMA)
1 x Antenna sector panel AS-5,3GHz-19dBi-sector 30°
1 x Fiber Optic Cable OP-8Å4(2õ4)-1, Single Mode. channel, pipes, (pneumatic cabiningîêë), without rodents.8 fibres.coils of mandrel. 1êÍ
1 x Áëîê ïèòàíèÿ 24V 0.7A Power Supply
1 x Cable MICROWAVE adapter Jumper N female-N female N ** m
1 x Connector UHF male for RG-6, (solder), NGB
1 x Fiber Optic Cable OBgPO-16Å6(4õ4)-2.7 (12), 12ìì. Single Mode. for pipes(pneumatic cabining), blocks, soil. armor-steel. ribbon,16 fibres,coils of man
1 x Fiber Optic Cable OCPt-12Å1(1õ12)-2, Single Mode. foots(70m) rope .central optical module, 12 fibres, 2êÍ
1 x Connector BNC male for RG-59 and RG-62 (solder), NGD
1 x Adapter Pigtail Wi-Fi for Senao, Cisco, Linksys, 1 m (N-male-RP-TNC)
1 x Fiber Optic Cable OArP-12Å4(3õ4)-3,5, Single Mode, building, channels, pipes(pneumatic cabining), 12 fibres, coils of mandrel, aramid filament, withou
1 x Adapter BNC T-connector male-male-male, NGD
1 x Adapter male BNC - female UHF, NGD
1 x Terminator BNC terminator 50 Ohm
2 x Cable RG-174, 90 % Al a braid, multicore Cu/19x0,10mm, SPE/0,14mm, PVC / 0,23MM, Taiwan, for 1 meter
1 x Wireless Access Point LINKSYS WAP54G Wireless Access Point 802.11g
1 x Adapter Pigtail SMA Male — BNC Male 50? CDMA, GSM N*m
1 x Adapter male BNC - female F, NGD
1 x Connector N-type male for RG-5D, angle, (solder), NGD
1 x Tool Kit 6 îòâåðòîê øåñòèangleüíûõ äëèíîé 60+103 ìì (D=3.2, 4.0, 5.0, 5.5, 1/8", 3/16")
1 x Connector SMB male for RG-174 angle (crimp), GGT
1 x Connector BNC male for RG-58 (solder), angle, NGD
1 x Wireless Access Point MikroTik RouterBoard Groove 5Hn
1 x Connector BNC male for RG-59 (turn), NGD
1 x Cable MICROWAVE adapter Jumper N male-RP-TNC male cable Belden RG-8 Nm
1 x Adapter Pigtail CDMA, GSM TNC male - TNC male, cable RG-58
1 x Tape copper screeningÿ 3M, acrylic glue, (12ììx33ì), Amin=55äÁ
1 x Connector UHF male for RG-58, (crimp), NGB
1 x Antenna Wi-Fi directional parabolic Wi-Fi ANP-2,4GHz-17dBi (Ukraine, Kyiv) connector N male, cable 10m
1 x Case MikroTik Universal RB333 Indoor case
1 x Ïðîõîäíîé Àäàïòåð Îïòè÷åñêèé SC/PC-LC/PC,simplex, ìåòàëë, female-to-female
1 x Tape poliester 1350 F-1 3M, Flame-Retardant, yellow, acrylic Pressure-Sensitive Adhesive, (50mmx66m), t=130C, U=5500V (RoHS)
1 x Antenna sector AS-2,4GHz-9dBi-sector 90°
1 x Êëåùè ïðÿìûå HTMC-336C äëÿ îáæèìà ðàçúåìîâ íà RG-58, 62, 6, 59, ñ òðåùåòêîé
1 x Àíòåííà âñåíàïðàâëåííàÿ GSM ANT-924MC-872-960 ÌÃö-5,5dBi, DAMPS/AMPS/CDMA/CDMA2000, äëèíà êàáåëÿ 3 ì
1 x Fiber Optic Patch Cord LC-LC SM G9 1m Dupplex
1 x Adapter N male - UHF male, NGD
1 x Connector BNC female for RG-58 (crimp), NGD
1 x Connector BNC female for RG-174 Panel Receptacle, mount nut (crimp), NGD
1 x Connector N-type male for RG-8D, (solder), NGD
1 x Connector N-type female O2,4mm for RG-8, RG-213, NGD
1 x Tool for mounting wire â Connectorû type 110 with îáðåçêîé (5 ïàð)
1 x Fiber Optic Cable UT008SM258 8 âîëîêîí, 9/125ìê
1 x Connector UHF male for RG-213, (turn), NGT
1 x Adapter TNC female - F male, NGD
1 x Adapter Pigtail Wi-Fi for Planet, D-link, OvisLink, TP-link, 1 m (N-male-RP-SMA)
1 x Adapter Pigtail CDMA, GSM SMA male - SMA male 1,5 m
1 x Fiber Optic Cable UT008-SM-03, 8 fibres, 9/125ìê
1 x Connector BNC male for RG-6 (crimp), NGD
1 x Pincers for crimp uninsulated contact and clamps for wires AWG 10 - 26 (0.35-5.5 ìì2)
1 x Connector BNC male for RG-58 (crimp) angle, NGD
1 x Adapter Pigtail RG-174 0,3 m (MMCX female-SMA female)
1 x Connector TNC male for RG-6, (crimp), NGD
1 x Cable UTP, 8-wire, category.5Å, hank 305 metre, 1 hank
1 x Connector BNC male for RG-213 (solder), angle, NGD
1 x Fiber Optic Cable UT004-SM-03, 8 fibres, 9/125ìê
1 x MikroTik RouterBOARD RB711-5Hn
1 x Connector UHF female Panel Receptacle for RG-58, (solder), NGB
76'906,73ãðí
Manufacturers
Scotch™ 23 All-Voltage Splicing Tape 3M Scotch™ 23 "Raw rubber" 19 mm x 9.15 m
[932IZOLSR3M19]
404,60ãðí

Data Sheet

Product Description

 

Scotch™ 23 Electrical Tape is a highly conformable self-fusing EPR (Ethylene Propylene Rubber) based, high voltage splicing tape.  It is a non-vulcanising, shelf-stable tape with excellent electrical properties.  23 Tape can be used as an insulation for low-voltage applications as well as an insulation for splices up to 69kV.

Tape Features

Can be used to splice and terminate cables whose emergency overload temperatures can reach 130°C.

Based on Ethylene Propylene Rubber (EPR).

Physical and electrical properties are unaffected by the degree of stretch.

Self-fusing tape.

Excellent electrical properties.

A special polyester liner which will not stick to the tape upon unwind.

Compatible with all solid dielectric cable insulation:­Polyethylene (high and low density). Cross-linked polyethylene (XLPE). Polyvinyl chloride (PVC). Butyl rubber. Ethylene Propylene Rubber (EPR). Oil-based rubber.

 

Applications

 

Primary electrical insulation for splicing cable from 600V to 69kV on all solid dielectric cables.

Primary insulation for building stress cones on cables up to 35kV on all solid dielectric cables.

Jacketing on high-voltage splices and terminations.

Moisture sealing electrical connections.

Bus bar insulations.

End sealing high-voltage cables.

 

Data – Typical Properties

 

Physical Properties

Test Method

Typical Value*

Colour

Black

Thickness ASTM-D4325

0.76mm

Tensile Strength ASTM-D4325

1.4KN/m

Ultimate Elongation ASTM-D4325

1000%

Operating Temperature

90°C (194°F)

Emergency Operating Temperature

130°C (266°F)

Fusion, ASTM-D4388

Passes

Thermal Conductivity

0.1208 Btu

ASTM-D1518

(hr)(sq ft) (°F per ft)

 

Modulus @ 130°C See Section 5 Ozone Resistance ASTM-D4388 Passes


 

 

Electrical PropertiesTest Method Typical Value*

Dielectric Strength ASTM-D4325 After Standard Conditioning 31.5 MV/m

After 96 hours @ 96% RH

>90% of Std

 

Condition Value

Insulation Resistance ASTM-1000

 

(Indirect method of electrolytic

>1 x 106

   corrosion)

megohms

 

Dissipation Factor See Section 5 Dielectric Constant See Section 5 Dielectric Strength at elevated

temperature See Section 5 *This data is not to be used for specification.  Values listed are for typical properties and should not be considered minimum or maximum.

 

Specifications


 

Product

The high-voltage corona-resistant tape must be based on ethylene propylene rubber and be capable of operation at the emergency cable temperature of 130°C (266°F).  The tape must be capable of being applied in either the stretched or unstretched condition without any resulting loss in either physical or electrical properties. The tape must not split, crack, slip or flag when exposed to various environments (indoor and outdoor).  The tape must be compatible with all synthetic cable insulations.  The tape must have a dissipation factor of less than 5% at 130°C (266°F) and must have a shelf life of 5 years.

Engineering/Architectural Specification

Splicing and terminating solid dielectric cables shall be done in accordance with drawings engineered by the splice material manufacturer such as the 2047 series available from 3M Company.  All splices and terminations shall be insulated using Scotch™ Brand 23 Electrical Tape.

 

Characteristics and Test Data


 

Modulus at 130°C (266°F)

A high-voltage splicing tape must constantly maintain a rubber­like consistency throughout the life of a splice.  One method of determining a rubber material consistency is by measuring the modulus of the material.  The modulus of a material is the stress required to elongate the material to a given elongation. 3M UK PLC 3M Ireland 3M UK PLC Electrical Products Sales Office Sales Office

Figure 1 shows the 100% modulus (stress required to elongate 23 Tape to 100% elongation) after heat ageing the samples at 130°C (266°F) for a varying number of days.  The results indicate a very stable product with excellent “body” or elasticity after oven ageing at 130°C (266°F).

 

Dissipation Factor

Figure 2 shows the dissipation of 23 Tape. This test was run according to ASTM-D150 at a stress of 50 V/mil (2.0 MV/m) and a frequency of 60 cycles per second.

Dielectric Constant

Figure 3 shows the dielectric constant versus temperature of 23 Tape. This test was run according to ASTM-D150 at a stress of 50 V/mil (2.0 MV/m) and a frequency of 60 cycles per second.

Dielectric Strength at Elevated Temperatures

A high-voltage splice must not only have a high dielectric strength at room temperature, but it must also have good values at the temperature at which it is expected to operate.  Figure 4 shows a plot of dielectric strength versus temperature.  This test was run according to ASTM-1000.

 

Dielectric Strength Versus Thickness

Dielectric Strength Versus Thickness Figure 5 shows a plot of dielectric strength in volts per mil versus thickness.  As can be seen by the curve, the dielectric strength in the original thickness of 0.76mm is 800 V/mil (31.5 MV/m). However, the dielectric strength of a 0.51mm thickness of 23 Tape is 1200 V/mil (47.2 MV/m).  This test was run according to ASTM-1000.

 

Installation Techniques

Scotch™ Brand 23 Electrical Tape should be applied in successive half-lapped, level-wound layers until desired build-up is reached.  To eliminate voids in critical areas, highly elongate 23 Tape. Stretch Tape in these critical areas just short of its breaking point. Doing so will not alter its physical or electrical properties.  In less critical areas, less elongation may be used. Normally, 23 Tape is stretched to . of its original width in these less critical areas.  Always attempt to half-lap to produce a uniform build-up.  When using 23 Tape for splicing cables from 35kV to 69kV, always elongate the tape throughout the entire splice.

 

Maintenance

 

Under normal storage conditions, 23 Tape has a 5-year shelf life. The tape is not impaired by freezing nor by overheated storage up to the point of flow which prevents removal from the package.

 

Availability

 

Scotch™ Brand 23 Electrical Tape is available in the following roll sizes from your local authorised 3M electrical distributor:

 

19mm x 9M25mm x 9M51mm x 9M

 

Other lengths and widths are available by special request.

Complete Product and Use Specifications are available through the Electrical Products Division, 3M Company.

 
Connector BNC female Panel Receptacle, NGD
Connector BNC female Panel Receptacle, NGD
Connector BNC male for RG-58 (crimp), NGD
Connector BNC male for RG-58 (crimp), NGD
Cable RG-213GER, 96% Cu screen, multicore /7x0,75mm, ÏÝ/7,25mm, ÏÂÕ/10,2mm, Germany, for 1 meter
Cable RG-213GER, 96% Cu screen, multicore /7x0,75mm, ÏÝ/7,25mm, ÏÂÕ/10,2mm, Germany, for 1 meter
Connector SMA female for RG-58, Panel Receptacle, (crimp), NGT
Connector SMA female for RG-58, Panel Receptacle, (crimp), NGT
Connector BNC male for RG-58 (crimp) angle, NGD
Connector BNC male for RG-58 (crimp) angle, NGD
Connector N-type male O2,8mm for RG-8, RG-213, Belden H-1000/9913 GOLD, GGD
Connector N-type male O2,8mm for RG-8, RG-213, Belden H-1000/9913 GOLD, GGD
 

2005-2023 MobilCom.UA Kyiv & Ukraine
Phone:+38 (044) 599 18 66
Vodafone: +38 (050) 462 07 99
Kyivstar: +38 (097) 593 71 51
lifecell: +38 (063) 350 40 53
mobilcom.ua e-mail: info@mobilcom.ua