RouterBOARD 411U with Atheros 300Mhz CPU, 32MB RAM, one LAN, one MiniPCI, one miniPCI express (for 3G), one USB port, one SIM slot, NAND Storage with RouterOS Level 4 (AP support) - CPU: Atheros AR7130 300MHz
- Memory: 32MB DDR SDRAM onboard memory
- Boot loader: RouterBOOT, 1Mbit Flash chip
- Data storage: 64MB onboard NAND memory chip
- Ethernet: One10/100 Mbit/s Ethernet with Auto-MDI/X
- MiniPCI slot: One MiniPCI Type IIIA/IIIB slot
One MiniPCIe slot for 3G modem (onboard SIM connector) - Serial port: One DB9 RS232C asynchronous serial port
- Wireless: not built in, possible by adding a miniPCI card
- Speaker: Mini PC - Speaker
- Power: Power options PoE: 10- 28V DC no power over datalines.
Power jack: 10 - 28V DC - Available Power Expansion Cards: 9 Watts (approximately)
- Dimensions/ Weight: 12.5 cm x 10.5 cm, Weight: 104g
- Operating System: MikroTik RouterOS v3 Level 4 Wisp license
- Temperature Operational: -20°C to +65°C
- Fan: None
- Power consumption: ~3W without extension cards, maximum - 12 W
The RB411U is a versatile yet very small device. It includes a miniPCI slot, a USB 2.0 port and also a miniPCI-E slot for connecting a 3G card. RB411U includes RouterOS - the operating system, which can be a router, firewall, bandwidth manager, a mobile 3G router, and more - all at the same time. One small device - with all the power of RouterOS. At a very special price. Memory and Storage Devices: Onboard Memory - The boards are equipped with 64MB DDR SDRAM onboard memory. Onboard NAND Storage Device - The boards are equipped with one 64 NAND nonvolatile memory chip. Extension Slots: MiniPCI Slot - The boards have One MiniPCI Type IIIA slots with 3.3V only power signaling. The slot will also accept MiniPCI Type IIB standard cards. MiniPCIe Slot - for onboard sim connector or 3G Modem. Input / Output Ports: LAN1 Port with PoE - This 10/100Mb/s Ethernet port is recognized as the first LAN interface. It is compatible with passive (non-standard) Power over Ethernet. The board accepts voltage input from 12 to 28 V DC. This board is not compatible with power over data lines. LEDs: Power LED - Power LED is on when the board is powered. User LED - User LED may be programmed at user`s option. It is lit by default when the board starts up, then it is turned off when the bootloader runs kernel.
|