RouterBOARD 411 with Atheros 300Mhz CPU, 32MB RAM, one LAN, integrated 2.4Ghz wireless, NAND Storage with RouterOS Level 3 (CPE support), no miniPCI, no serial port Supports POE: 10 to 28vdc on unused pairs (no power over datalines), or 10-28vdc power jack support. Overall dimensions: 105mm x 105mm (4.13in x 4.13in). - CPU: Atheros AR7130 300MHz
- Memory: 32MB DDR SDRAM onboard memory
- Boot loader: RouterBOOT, 1Mbit Flash chip
- Data storage: 64MB onboard NAND memory chip
- Ethernet: One10/100 Mbit/s Ethernet with Auto-MDI/X
- MiniPCI slot: none
- Serial port: none
- Built in Wireless: One Integrated Atheros Based wireless card with 802.11b & 802.11g.
RX Sensitivity: 802.11g: -87dBm @ 6Mbps to -69dBm @ 54Mbps 802.11b: -92dBm @ 1Mbps to -83dBm @ 11Mbps - Speaker: Mini PC - Speaker
- Power: Power options PoE: 10- 28V DC no power over datalines. No Power jack
- Available Power Expansion Cards: None
- Dimensions/ Weight: 10.5 cm x 10.5 cm (4.13 in x 4.13 in) Weight: 67g
- Operating System: MikroTik RouterOS v3 Level 3 license
- Temperature Operational: -20°C to +65°C
- Fan: None
- Power consumption: ~3W, maximum - 5 W
The RB411R is a small CPE type RouterBOARD wireless router with an integrated 2.4GHz wireless card. RB411R includes RouterOS - the operating system, which can be a router, firewall, bandwidth manager, a CPE and more - all at the same time. The RB411R has a very low power consumption rating - only 5.6W, ideal for solar panel installations. One small device - with all the power of RouterOS. At a very special price. Memory and Storage Devices: Onboard Memory - The boards are equipped with 32MB DDR SDRAM onboard memory. Onboard NAND Storage Device - The boards are equipped with one 64 NAND nonvolatile memory chip. Extension Slots: MiniPCI Slot - None Input / Output Ports: LAN1 Port with PoE - This 10/100Mb/s Ethernet port is recognized as the first LAN interface. It is compatible with passive (non-standard) Power over Ethernet. The board accepts voltage input from 12 to 28 V DC. This board is not compatible with power over data lines. LEDs: Power LED - Power LED is on when the board is powered. User LED - User LED may be programmed at user`s option. It is lit by default when the board starts up, then it is turned off when the bootloader runs kernel.
|