RouterBOARD 411 with Atheros 300Mhz CPU, 32MB RAM, one LAN, integrated 2.4Ghz wireless, NAND Storage with RouterOS Level 3 (CPE support), no miniPCI, no serial port

Supports POE: 10 to 28vdc on unused pairs (no power over datalines), or 10-28vdc power jack support. Overall dimensions: 105mm x 105mm (4.13in x 4.13in).

• CPU: Atheros AR7130 300MHz
• Memory: 32MB DDR SDRAM onboard memory
• Boot loader: RouterBOOT, 1Mbit Flash chip
• Data storage: 64MB onboard NAND memory chip
• Ethernet: One10/100 Mbit/s Ethernet with Auto-MDI/X
• MiniPCI slot: none
• Serial port: none
• Built in Wireless: One Integrated Atheros Based wireless card with 802.11b & 802.11g.
  RX Sensitivity:
  802.11g: -87dBm @ 6Mbps to -69dBm @ 54Mbps
  802.11b: -92dBm @ 1Mbps to -83dBm @ 11Mbps
  
• Speaker: Mini PC - Speaker
• Power: Power options PoE: 10- 28V DC no power over datalines. No Power jack
• Available Power Expansion Cards: None
• Dimensions/ Weight: 10.5 cm x 10.5 cm (4.13 in x 4.13 in) Weight: 67g
• Operating System: MikroTik RouterOS v3 Level 3 license
• Temperature Operational: -20°C to +65°C
• Fan: None
• Power consumption: ~3W, maximum - 5 W

The RB411R is a small CPE type RouterBOARD wireless router with an integrated 2.4GHz wireless card.

RB411R includes RouterOS - the operating system, which can be a router, firewall, bandwidth manager, a CPE and more - all at the same time.

The RB411R has a very low power consumption rating - only 5.6W, ideal for solar panel installations. One small device - with all the power of RouterOS. At a very special price.

Memory and Storage Devices: Onboard Memory - The boards are equipped with 32MB DDR SDRAM onboard memory. Onboard NAND Storage Device - The boards are equipped with one 64 NAND nonvolatile memory chip.

Extension Slots: MiniPCI Slot - None

Input / Output Ports: LAN1 Port with PoE - This 10/100Mb/s Ethernet port is recognized as the first LAN interface. It is compatible with passive (non-standard) Power over Ethernet. The board accepts voltage input from 12 to 28 V DC. This board is not compatible with power over data lines.

LEDs: Power LED - Power LED is on when the board is powered. User LED - User LED may be programmed at user`s option. It is lit by default when the board starts up, then it is turned off when the bootloader runs kernel.